Fischer Mesh Anchor DM 16x130mm

Fischer Mesh Anchor DM 16x130mm designed for use in combination with chemical resins on hollow materials such as semi-solid bricks. It is designed to ensure uniform resin distribution within the substrate, optimizing anchor holding power.

Key Features:

• Mesh Structure: allows the resin to expand inside the hollow brick, reducing material consumption and improving adhesion.
• Centering Fins: facilitate the precise insertion of the threaded rod, keeping it in place during installation.
• Ideal for Hollow Substrates: the resin expands through the mesh and creates an effective mechanical anchor, even in materials with voids.
• Can be used in overhead positions: thanks to the anchor’s shape, it stays in place without falling during vertical application.

Technical Specifications:

• Hole Diameter: 16 mm
• Minimum Hole Depth: 140 mm
• Effective Anchoring Depth: 130 mm
• Compatible with Threaded Rods: from M6 up to M12
• Resin Quantity Required: approximately 8 ml per anchor

Typical Applications: This anchor is suitable for installations on hollow masonry where strong holding power with chemical resin is required, such as fixing railings, brackets, frames, and other light or medium structures.
Practical Use: The injection of the resin must start from the bottom of the nylon mesh anchor. Therefore, it is recommended to push the mixing nozzle to the bottom of the anchor, injecting the resin evenly by gradually pumping the gun and slowly raising the nozzle towards the surface in order to fill the entire anchor.