Description
HT M75L is a multifunctional instrument for electrical safety verification.
Through this single instrument, it is possible to conduct a series of fundamental checks to ensure the safety of electrical installations:
- Earth continuity resistance
- Trip time for Type A 30mA, AC up to 300mA residual current devices
- Trip current for Type A and AC 30mA residual current devices (Ramp test)
- Insulation resistance measurement at 250V or 500VDC
- Continuity of protective conductors with 200mA
- Phase sequence check with 1 or 2 terminals
- Leakage current measurement with optional HT96U clamp*
- TRMS Multimeter:
- AC/DC Voltage
- Resistance and continuity
- Frequency
The large internal memory allows for the saving of measurements taken, enabling them to be subsequently transferred to a PC via the serial connection.
By connecting the HT M75L to the power outlet, entering the differential current value, and using the AUTO function, it allows for a sequence of tests to be performed. The result, stored internally, already contains an indication of compliance or non-compliance with regulatory requirements using simple OK or NOT OK symbols.
Included in the package:
- HT M75L
- C2075 2-terminal cable with Shuko plug
- KIT0075 Set of black and green test leads and crocodile clips
- BORSA2000 Carrying bag
- YABAT0003000 Rechargeable NiMH battery 1.2V type AA, 4 pieces
- User manual and quick guide
- ISO9000 Calibration Certificate
