Description
FlatFix Fusion Stabilizer
The FlatFix Fusion Stabilizer from Enstall serves as reinforcement of the mounting system on flat roofs and is placed between two base profiles. By overlapping the stabilizers with each other, it is possible to earth them.The earthing angle is used to connect the stabilizer to the system. Place the first stabilizer on the back of the panels, so that the bottom edge falls between the open lugs of the high base elements and whereby the side of the stabilizer is as level as possible with the outer edge of the high base element. Mount 1 side of the stabilizer to the high base element with an M6 x 12 mounting screw. Make sure that the mounting screws do not turn out of place in the base element. Repeat the above steps when placing the second stabilizer and make sure that the slotted holes of the stabilizers and the screw holes of the high base elements overlap. The FF100-7242 has a length of 1800mm.
Reviews
There are no reviews yet.